Solution Background: As various ISPs increasingly tighten public IPv4 addresses (Chengdu Telecom requires a package of 399 RMB or more plus a 100 RMB monthly service fee to get a public IPv4 address, and for old users who already have a public IPv4 address, even if they upgrade their package now, the public IPv4 address is highly likely to...
Preface: Because of the fundamental differences between the IPv6 and IPv4 protocols, in the future trend where public IPv6 IPs become mainstream, some long-standing traditional technologies that existed on IPv4 have lost their utility: such as port mapping, NAT, etc. In the home data center public IPv6... that I am currently conceiving...
Preface: In previous articles, I deployed OpenWrt using a virtual machine (see: OpenWrt Soft Router Series: Detailed Tutorial on PVE Deployment of OpenWrt (23.05.2)). In addition to this method, you can also install OpenWrt directly on bare metal or use d...
Preface: I officially started playing with routers probably with Netgear's R7000. However, back then it seemed to be the era of 8M ADSL, with an uplink of only 512k, so I didn't tinker much at first and just used the official firmware. And in my memory, the blocking back then was far from comparable to now, and the impact was...
Preface: In the previous article (see: OpenWrt Soft Router Series: Detailed Tutorial on PVE Deployment of OpenWrt (23.05.2)), I deployed OpenWrt on PVE. This article is about installing 3 software packages on OpenWrt that I consider necessary: o...
Preface: Actually, I used LEDE a long time ago, but the main purpose back then was for multi-dialing. Later, after using iKuai, I found that iKuai was unbeatable in terms of multi-dialing, so I abandoned LEDE (partly because I didn't really like LEDE's interface). Now my home internet setup is physical iKuai + AC...
Preface: Actually, I have always wanted to write a tutorial on setting up the Docker version of Nextcloud. The reason is that every time I redeploy it, it takes a long time to tinker with, and there are too many details to remember. But because it is really too troublesome and there would be a lot to write, I really didn't have the mood or motivation to actively mess with it. But...
Preface: Actually, I used to have no interest in intranet penetration technology, mainly because my home broadband is a dual-stack public IPv4/IPv6 environment (IPv4 is even 3-dialed, with 3 public IPs and 3 uplinks of 60M, which is more than enough!). Once dynamic DNS is configured and port mapping on iKuai is added...
1 Preface: When we use WordPress to build our own personal blog, a common problem we often encounter is the need to use multiple ways to access WordPress. For example, on the intranet, I want to use the intranet address 192.168.x.x to access it, while on the extranet...
Preface: In my previous two articles, I introduced proxychains (see: Home Data Center Series - Powerful Local Proxy Tool: proxychains) and gost (see: Home Data Center Series - Using gost to build your own proxy server and forwarding...