Foreword For the real-time health monitoring and alarm of my group stations, I have always used the combination of uptime-kuma + bark server (for specific construction and configuration, please refer to: Docker series to build a message push server based on bark server...
Preface I am now used to two ways of deploying nginx: pagoda panel and docker. Among them, the nginx of pagoda panel is mainly used for ssl decryption and reverse proxy, focusing on convenience (for detailed configuration steps, see: linux panel series configure reverse proxy and use non-443 port...
I started playing around with smart home products when Xiaomi first launched them. I should be considered one of the earliest people to play around with smart home products. I bought whatever was released (I replaced all the regular switches for the lights at home with remote control ones, but they broke down in less than 3 years...), so I have a lot of Xiaomi products at home...
Solution Background As operators tighten their control over IPv4 public network addresses (Chengdu Telecom requires packages above 399 yuan plus a monthly service fee of 100 yuan to get an IPv4 public network address, and for old users with public IPv4 addresses, even if they upgrade their packages, the IPv4 public network address is likely to be...
Introduction Due to the essential differences between IPv6 and IPv4 protocols, some traditional technologies that have existed on IPv4 for a long time have lost their functions in the future trend of IPv6 public network IP becoming the mainstream: such as port mapping, NAT, etc. In the IPv6 public network of the home data center that I am planning...
Preface In the previous article, I deployed openwrt using a virtual machine (see: OpenWrt soft router series PVE deployment OpenWrt (23.05.2) detailed tutorial). In addition to this method, you can also install openwrt directly on a bare metal machine and use d…
Preface I started playing with routers with Netgear's R7000: But it seemed to be the era of ADSL 8M, and the uplink was only 512k, so I didn't bother much at first and just used the official firmware. And I remember that the blockade at that time was far from what it is now, and the impact was still...
Preface In the previous article (see: OpenWrt Soft Router Series PVE Deployment OpenWrt (23.05.2) Detailed Tutorial), I deployed openwrt on pve. This article is to install the three necessary software on openwrt: o…
Preface Actually, I used lede a long time ago, but the main purpose at that time was for multi-dial. Later, after using iQuick, I found that iQuick was invincible in multi-dial, so I gave up lede (one reason was that I didn’t like the interface of lede). Now my home Internet access is physical iQuick + AC…
Preface I have always wanted to write a tutorial on how to build a docker version of NextCloud. The reason is that every time I redeploy, it takes a long time and there are too many details to remember. But it is too troublesome and I have to write a lot. I really don’t have the mood or motivation to take the initiative to do it. No…
